Bottle, Can Vending Machines, Multi Price, Corporate Logo

Prices do not include freight, please click here to check freight quotes prior to purchasing

Model numbers shown represent approximate capacities and machine weights shown on pallets, side decals may vary

B-Rated, These machines have been refurbished by our suppliers, (major bottling companies) usually within a year or two of being sold to us or have good generic graphics (cold drinks etc). The can machines will usually have one or two models back graphics (many times new signs and side decals have been installed by the bottler) and are in overall decent condition. We give these machines a general cleaning, usually with our power washer. The machines are cleaned inside and out then tested with cans to ensure a proper vend. All general illumination lamps are replaced as needed. Rebuilt coin mech and dollar bill validators are then installed. These machines come with our standard 90 day limited warranty. These machines are very similar to A-rated except that they have not been completely detailed, repainted. or new signs installed. These are usually suitable for many locations that do not require new looking machines. IN MOST CASES THESE MACHINES 'DO NOT HAVE' NEW SIGNS, BUTTONS OR SIDE DECALS. C-rated are the same as B-rated listed above except they have older graphics.

Can shims, Machines are listed as bottle machines will only vend 20 oz bottles. If you need some columns in the bottle machine to vend 12oz cans or 16oz energy drinks then you need to add cans shims in the pull down boxes shown next to the machine.

$5 bill upgrades, All machines shown above accept $1 bills only. If you need to accept $5 bills then you can upgrade the machine at the time of purchase with a Conlux pair of $5 validator and a Conlux 5 tube coin mech. When accepting $5 bills it is recommended that a higher tube count mech be installed with the validator. This will insure that the coin mech will not empty all of its change when multiple $5 bills are inserted. It is much less expensive to add a $5 upgrade when the machines is purchased because we replace the existing coin mech and validator. If an upgrade is purchased at a later time, after the machine has been shipped and in use then the cost is $299.